You should also pay attention to technical specifications such as memory type (. DDR ), clock speed and CAS latency. After properly preparing the workplace and reading the user manual for our motherboard, we can proceed to the physical installation of RAM modules, which is a relatively simple task even for people who do not have much experience in assembling computers - step by step Before you start installing RAM, turn off your computer and disconnect it from the power supply.
Then open the computer case to gain access to the inside of the CPU. Locate the Country Email List RAM slots on the motherboard. These are long, narrow connectors with latches on both sides. Before inserting the RAM module, make sure the latches are in the open position. The RAM module has a notch on one edge that must align with the protrusion in the slot on the motherboard.
Grasp the module at the sides and gently slide it into the slot, making sure that the notch on the module lines up with the protrusion in the slot. Once the module is in the correct position, apply even pressure to both ends of the RAM module until the latches automatically close and hold the module firmly in place. Make sure the module is firmly seated and does not move. Once all RAM modules are properly installed, close the computer case, connect all cables, and turn on the computer.